Installation
LDG Product FAQ
Some LDG tuners have a two position switch. The Ant button on the tuner will toggle between Ant 1 and Ant 2. The LED for Ant will light when Ant 2 is select...
Mon, 13 May, 2019 at 1:14 PM
Most are not. Only those specifically intended for outdoor installation such as the RT-100 and RT-600 are water resistant. All others must be kept dry like ...
Mon, 13 May, 2019 at 1:14 PM
A regulated linear supply is preferred for best performance. If you have trouble and are using a switching type power supply, try a linear supply to isolate...
Mon, 13 May, 2019 at 1:15 PM
LDG tuners are designed for coax-fed antennas. To use it with an antenna fed with ladder line you need a 4:1 balun. LDG sells a suitable 200W model. Many ot...
Mon, 13 May, 2019 at 1:15 PM
LDG tuners are designed for coax-fed antennas. To use it with a long wire antenna you may need a 1:1 balun. LDG sells a suitable 200W PEP model. Higher powe...
Mon, 13 May, 2019 at 1:15 PM
The center conductor is positive. The connector size is 5.5x 2.5 mm.
Mon, 13 May, 2019 at 1:15 PM
Yes, www.cheapham.com carries all of our optional cables and replacement cables.
Mon, 13 May, 2019 at 1:16 PM
Yes, that will work fine as long as you provide adequate RF shielding.
Mon, 13 May, 2019 at 1:16 PM
Sorry, no. Each meter is designed to work with a specific tuner. There are very few radios that have a meter port and none of them are compatible with any o...
Mon, 13 May, 2019 at 1:16 PM
Sorry, no. The meter is designed to work with those specific radios. There are very few other radios that have meter port.
Mon, 13 May, 2019 at 1:17 PM